Media hoses
We develop and produce all the polyurethane hoses for integration in umbilicals / dresspacks.
Our polyurethane hoses are used in many industrial applications, e. g. on industrial robots. They are utilised to transmit air, water and gases, or also as tubes to convey and position solid states such as rivets, bolts etc.
BizLink tube-fit PUR-line
Reinforced two layer polyurethane hoses – self-locked
Especially recommended for robotics equipment and machines, our hoses are built to comply with the most demanding conditions.
- Materials: PUR, PA and special compounds
- Single-layer construction
- Twin-layer construction with fiber braid reinforcement sealed between two extruded polyurethane layers
- High abrasion resistance
- Seven different standard colours (special colours optional)
- Nominal cross sections from 1/4" to 1"
- Self extinguishing, complies with UL94 V2 and MSHA standards
- Resistant to welding spatters
- Resistant against hydrocarbons, bacteria, caustic solutions etc.
- Temperature range from –20 °C (–4 °F) to +80 °C (176 °F) – continuous use
- Limited elongation (1.5 % at 20 °C [68 °F] and 150 psi)
- UV and ozone resistant
- 100 % silicone free
Fittings
Corresponding to the polyurethane hoses BizLink tube-fit PUR-line we offer diverse fittings, such as brass fittings, straight, 45° or 90° angled. The installation of self-locked polyurethane hose on fittings is simple and fast.
- Our specific hose tool guarantees an easy mount without deterioration
- Dry mount
- Installation without hose clamp and without crimping with most of the standard fittings
(F – 32) * 5 / 9 = C
C * 9 / 5 + 32 = F
| C | F | C | F | C | F | C | F |
|---|---|---|---|---|---|---|---|
| –18 | 0 | 1 | 34 | 20 | 68 | 39 | 102 |
| –17 | 1 | 2 | 36 | 21 | 70 | 40 | 104 |
| –16 | 3 | 3 | 37 | 22 | 72 | 41 | 106 |
| –15 | 5 | 4 | 39 | 23 | 73 | 42 | 108 |
| –14 | 7 | 5 | 41 | 24 | 75 | 43 | 109 |
| –13 | 9 | 6 | 43 | 25 | 77 | 44 | 111 |
| –12 | 10 | 7 | 45 | 26 | 79 | 45 | 113 |
| –11 | 12 | 8 | 46 | 27 | 81 | 46 | 115 |
| –10 | 14 | 9 | 48 | 28 | 82 | 47 | 117 |
| –9 | 16 | 10 | 50 | 29 | 84 | 48 | 118 |
| –8 | 18 | 11 | 52 | 30 | 86 | 49 | 120 |
| –7 | 19 | 12 | 54 | 31 | 88 | 50 | 122 |
| –6 | 21 | 13 | 55 | 32 | 90 | 51 | 124 |
| –5 | 23 | 14 | 57 | 33 | 91 | 52 | 126 |
| –4 | 25 | 15 | 59 | 34 | 93 | 53 | 127 |
| –3 | 27 | 16 | 61 | 35 | 95 | 54 | 129 |
| –2 | 28 | 17 | 63 | 36 | 97 | 55 | 131 |
| –1 | 30 | 18 | 64 | 37 | 99 | 56 | 133 |
| 0 | 32 | 19 | 66 | 38 | 100 | 57 | 135 |
BizLink tube-fit FR-line
Polyurethane hoses
For industrial applications, especially for robotic and welding equipment BizLink has developed the half-stiff and flame-retardant polyurethane hoses as a transmission medium for compressed air and (cooling) water.
Mechanical and chemical properties
- Silicone free
- Halogen free
- Flame resistant, according to UL 94-V0, self-extinguishing
- Resistance to oils / mineral oil / oxygen / ozone / weak acids / diluted bases
- UV resistant
- Abrasion resistant
- Working temperature range: –30 °C (–22 °F) to +90 °C (194 °F)
Corresponding to the polyurethane hoses BizLink tube-fit FR-line we offer female thread and male thread fittings, e. g. rotatable, 90° angled.
Fitting male thread straight with colour indication ring
- Operating pressure: –0.98 up to 18 bar
- Equipment temperature: –20 °C (–4 °F) to 80 °C (176 °F) – high temperature design on request
- Characteristics: Applicable for gaseous and fluid media, optimized and improved flow characteristics for water
- Material: Nickel plated brass, indication ring silicon aluminium anodized in colours
Bulkhead fitting with colour indication ring
- Operating pressure: –0.98 up to 18 bar
- Equipment temperature: –20 °C (–4 °F) to 80 °C (176 °F) – high temperature design on request
- Characteristics: Applicable for gaseous and fluid media, optimized and improved flow characteristics for water
- Material: Nickel plated brass, indication ring silicon aluminium anodized in colours
(F – 32) * 5 / 9 = C
C * 9 / 5 + 32 = F
| C | F | C | F | C | F | C | F |
|---|---|---|---|---|---|---|---|
| –18 | 0 | 1 | 34 | 20 | 68 | 39 | 102 |
| –17 | 1 | 2 | 36 | 21 | 70 | 40 | 104 |
| –16 | 3 | 3 | 37 | 22 | 72 | 41 | 106 |
| –15 | 5 | 4 | 39 | 23 | 73 | 42 | 108 |
| –14 | 7 | 5 | 41 | 24 | 75 | 43 | 109 |
| –13 | 9 | 6 | 43 | 25 | 77 | 44 | 111 |
| –12 | 10 | 7 | 45 | 26 | 79 | 45 | 113 |
| –11 | 12 | 8 | 46 | 27 | 81 | 46 | 115 |
| –10 | 14 | 9 | 48 | 28 | 82 | 47 | 117 |
| –9 | 16 | 10 | 50 | 29 | 84 | 48 | 118 |
| –8 | 18 | 11 | 52 | 30 | 86 | 49 | 120 |
| –7 | 19 | 12 | 54 | 31 | 88 | 50 | 122 |
| –6 | 21 | 13 | 55 | 32 | 90 | 51 | 124 |
| –5 | 23 | 14 | 57 | 33 | 91 | 52 | 126 |
| –4 | 25 | 15 | 59 | 34 | 93 | 53 | 127 |
| –3 | 27 | 16 | 61 | 35 | 95 | 54 | 129 |
| –2 | 28 | 17 | 63 | 36 | 97 | 55 | 131 |
| –1 | 30 | 18 | 64 | 37 | 99 | 56 | 133 |
| 0 | 32 | 19 | 66 | 38 | 100 | 57 | 135 |
BizLink tube profile-line
Polyurethane hoses for feeding applications
These special tubes with customised inside and outside profile are for example used for rivet and weld nut delivery systems in the automotive and aviation industry. They can be implemented for other feeding applications as well.
Mechanical and chemical properties
- Inner and outer layers are 100 % paint resistant
- Silicone free
- Halogen free
- Resistance to oils / mineral oil / oxygen / ozone / weak acids / diluted base
- Abrasion and scratch resistant, resulting in a longer life-cycle
- High cross sectional strength
- Standard temperature range: 0 °C (32 °F) up to +50 °C (122 °F)
- Colour: transparent to crystal clear
- Inside and outside profile: customised to specification
- Construction: reinforced if needed
- Technical characteristics for working pressure, burst pressure and vacuum can be modified in accordance with the application and the customer‘s needs.
(F – 32) * 5 / 9 = C
C * 9 / 5 + 32 = F
| C | F | C | F | C | F | C | F |
|---|---|---|---|---|---|---|---|
| –18 | 0 | 1 | 34 | 20 | 68 | 39 | 102 |
| –17 | 1 | 2 | 36 | 21 | 70 | 40 | 104 |
| –16 | 3 | 3 | 37 | 22 | 72 | 41 | 106 |
| –15 | 5 | 4 | 39 | 23 | 73 | 42 | 108 |
| –14 | 7 | 5 | 41 | 24 | 75 | 43 | 109 |
| –13 | 9 | 6 | 43 | 25 | 77 | 44 | 111 |
| –12 | 10 | 7 | 45 | 26 | 79 | 45 | 113 |
| –11 | 12 | 8 | 46 | 27 | 81 | 46 | 115 |
| –10 | 14 | 9 | 48 | 28 | 82 | 47 | 117 |
| –9 | 16 | 10 | 50 | 29 | 84 | 48 | 118 |
| –8 | 18 | 11 | 52 | 30 | 86 | 49 | 120 |
| –7 | 19 | 12 | 54 | 31 | 88 | 50 | 122 |
| –6 | 21 | 13 | 55 | 32 | 90 | 51 | 124 |
| –5 | 23 | 14 | 57 | 33 | 91 | 52 | 126 |
| –4 | 25 | 15 | 59 | 34 | 93 | 53 | 127 |
| –3 | 27 | 16 | 61 | 35 | 95 | 54 | 129 |
| –2 | 28 | 17 | 63 | 36 | 97 | 55 | 131 |
| –1 | 30 | 18 | 64 | 37 | 99 | 56 | 133 |
| 0 | 32 | 19 | 66 | 38 | 100 | 57 | 135 |
BizLink connector for feed-hose
Connector for extruded rivet feed-hoses or rivet feed-hose cores in protective sheathes
The rivet cores with the plastic adapters are inserted from both sides into the main body through the pressure glands (M32 or M40 system) and meet in the middle. The plastic adapters are indexed relative to one another by the special internal geometry of the main body. Dowels and spring-loaded retaining pins ensure the precise positioning of the plastic adapters in the main body and hold the plastic adapters in their axial position.
The design of the internal profile of the main body excludes errors in the installation of the plastic adapters (Poka Yoke). The geometry allows a smooth and simple guidance of the ends of the rivet cores including the adapters through the compression glands. To ensure a long-lasting and secure use, the rivet cores are glued to the adapters.
The rivet feed-hose connector can also be used with semihollow self-piercing rivets, friction welding and Flow-Drill screws in the automobile industry and in aircraft construction.
The challenge
Easy and quick replacement of the rivet core or the rivet feed-hose, where necessary, without disassembly of additional system components, in case of wear or preventive maintenance.
The solution
The rivet feed-hose connector is suitable for all common feed-hose core types (T-profiles) independent of the brand.
The main body remains the same for all rivet core variants. Only the internal plastic inserts have to be adapted to the geometry of the feed-hose core, which assures high compatibility with all common feed-hose types. Compression glands are used to secure the feed-hose cores and the feed-hoses to the mainbody. As the compression glands are non-constricting, the system is pressure-stable with a low tightening force. The special internal geometry of the main body ensures an errorfree installation of the plastic adapters (Poka Yoke) and a replacement without any dismantling of additional components.
Benefits
- Fast replacement – reduction of downtime
- Pressure-stable due to the use of non-constricting compression glands
- Maintenance-free
- Use as compressed air amplifier possible
- Cost saving – replacement of individual sections of the feed-hose
